Downloads
Plenary talks
- Susan A. Bernal Lopez – Correlating blast furnace slag features with the performance of low carbon slag-based cements
Paper – Presentation - Miguel Angel Estrada Moreno – Strategies for slag valorisation in the copper industry
Paper - Vojtech Ettler – The leaching behavior of smelting slags – From contaminants to critical metals
Paper - Florian Flachenecker – The recovery and resilience facility of the European Union – Towards a sustainable and circular recovery?
Paper - Caisa Samuelsson – Slag valorisation – The mineralogical approach
Paper - Johan van Boggelen – HIsarna – Considerations for valorisation of slag and other by-products when developing new processes
Paper
Oral presentations
- Lugas Raka Adrianto – Life cycle assessment of emerging processes to valorise mining waste
Paper – Presentation - Amit Ahsan – In-situ slag analysis with LIBS – The future technology to analyze slag sample fast and preparation free
Paper - David Algermissen – Future slag production in a low carbon steel industry – A break in the circular economy?
Paper - Lukas Arnout – Industrial validation of alkali-activated slag concrete in agricultural environments
Paper - Sander Arnout – Integration of slag properties in daily process decision software
Paper - Srecko Bevandic – Mineralogical and geochemical characterisation of metallurgical waste from a historic Zn-Pb tailing pond (Plombières, Belgium)
Paper - Ludwig Blenau – Carbothermic reduction of fayalitic slag with graphite – Understanding reaction kinetics for pig iron production
Paper – Presentation - Mark Cešnovar – Foaming alkali-activated slag based material with hydrogen peroxide, sodium perborate and sodium percarbonate
Paper - Zhongfu Cheng – Numerical study on mass transfer in a slag fuming process
Paper - Andreas Ehrenberg – Dry and wet granulated blast furnace slag – Comparison of their cementitious properties
Paper - Laura Finken – A new approach on BOF lime and dolime dissolution evaluation in the early stage of oxygen blowing
Paper - Asghar Gholizadeh-Vayghan – Application of granulated treated non-ferrous metallurgical slags as mineral admixture in cementitious mixtures
Paper - Michiel Giels – Designing highly reactive precursors from bauxite residue – Can the Rilem R3 test assist?
Paper - Cassian Gottlieb – How LIBS based online analysis opens up new possibilities in slag recycling, slag valorisation and refractory recycling
Paper - Barbara Horvat – The role of slag as a co-binder in alkali-activated mineral wool waste
Paper – Presentation - Shuigen Huang – Microstructure evolution of slag and spinel particles of Zn fuming slag
Paper - Federica Iaccino – Valorised slags under risk assessment obligations
Paper – Presentation - Stergi Kapelari – A carbon-free melting process for Fe recovery from an Al and Na – depleted bauxite residue
Paper - Stergi Kapelari – Simultaneous iron, alumina and soda recovery from bauxite residue (red mud), with H2 gas and NaOH
Paper - Jihye Kim – Valorisation of steelmaking slag using carbothermic reduction followed by acid baking – water leaching
Paper - Jihye Kim – The CO2 sequestration by supercritical carbonation of steelmaking slag
Paper - Efstathios Kyrilis – Valorisation potential of V-bearing residues
Paper - Hongbin Ling – Mineralogical characterization of antimony-containing metallurgical residues
Paper - Lorien Luyckx – Phosphorous recovery from biomass combustion ash as sustainable alternative for phosphate rock
Paper - Valentina Mariga – Sustainability analysis in the mining sector – A sustainability assessment of new recycling technologies for sulphidic mine residues valorisation
Paper - Alberto Mejía Pérez – Valorisation of air-granulated iron silicate slag for construction materials
Paper – Presentation - Nour-Eddine Menad – Recovery of valuable metals from EAF slag by microwave assisted leaching
Paper - Kazuki Morita – Effect of cooling conditions on precipitated phase and alkaline dissolution behaviour of steelmaking slags
Paper - Antoine-Floribert Mulaba-Bafubiandi – Valorisation of slag from aluminum recycling as three legged pot are produced
Paper - Stéphanie Muller – Development of an environmental and economic decision support tool comparing steel slags management options
Paper - Roberto Murillo Alarcón – Fe-rich slag-based porous inorganic polymers – Can hydrothermal curing enhance the properties?
Paper - Fernando Pereira – Alkaline hydrometallurgical approach for steel slag management
Paper - Arne Peys – Utilization of sodium-rich lead-acid battery slag as alkaline activator for blast furnace slag
Paper - Boudewijn M. Piscaer – Getting it on the market – An urgency for a sustainable society
Paper – Presentation - Ryszard Prajsnar – Lead slags cleaning in a pilot TSL furnace
Paper – Presentation - Maximilian Schleiting – Shrinkage reduction of alkali activated slag by using burnt oil shale
Paper - Sanna Torniainen – Carbon footprint comparison of traditional road versus ferrochrome slag (OKTO) structure
Paper - Leandro Voisin – Behavior of silicon carbide- and alumina-based refractories in contact with molten phases of copper matte and slag
Paper – Presentation - Alexander Wetzel – Ultra-high performance concrete based on alkali activated slag with reduced shrinkage
Paper
Poster presentations
- Mohamed Aâtach – Process oriented characterisation of copper slag processed by flotation in view metals recovery
Paper - Mohammad Amzad Hossain Bhuyan – Preparation of highly porous alkali-activated blast furnace slag foam and its characterization
Paper - Zhongfu Cheng – Study on zinc fuming kinetics in a bubble-stirred molten slag bath
Paper - Nicole Dilissen – Regeneration of alite and belite in hydrated cement paste by microwave technology
Paper - Jillian Helser – Environmental assessment and valorisation potential of waste from historical mining and ore processing
Paper - Lubica Kriskova – Use of metallurgical residues as supplementary cementitious materials
Paper - Hongbin Ling – Selective removal of arsenic from crude antimony trioxide by leaching with nitric acid
Paper - Pavel Leonardo Lopez Gonzalez – Evaluation of factors involved in the recycling of alkali-activated BOF-slag mortars as binder – effect of fineness and solution concentration
Paper - Antoine Floribert Mulaba-Bafubiandi – Zinc recovery from smelter slag and valorisation of secondary slag
Paper - Roberto Murillo Alarcón – Porous inorganic polymers from Fe-rich slags by mechanical foaming
Paper - Rui Novais – Inorganic polymer adsorbents – A safe and efficient approach to depollute heavy metal contaminated wastewaters
Paper - Ioanna Papayianni – Characterization of ladle furnace slag as supplementary cementing material and alkali-activated precursor
Paper - Rainer Seeling – Alferrock – Paradigm shift within the aluminium industry
Paper - Grace Tawane – Extraction of vanadium from discard titaniferous slag using sulfation roasting process
Paper - Ladji Tikana – From stone to stone – The circular path of iron silicate
Paper – Poster – Presentation - Jorn Van De Sande – Fire-resistant inorganic polymer foams made from Fe-rich slags
Paper - Jules Vermeiren – Dehydration of Portland cement and slag blended cement pastes and mortars by microwave heating
Paper - Roger Vizcaino – Design of new products for ladle slag valorisation
Paper - Yannan Wang – Thermodynamic simulation of CaO modified Zn fuming slag
Paper - Nana Wen – The effect of the chemical composition of MgO-CaO-FeO-Al2O3-SiO2 slag on the reaction kinetics and compressive strength of alkali-activated materials
Paper - Ling Zhang – In-situ impedance measurement during slag cooling
Paper